The Roofing Master Pack is the complete kit for roofing professionals, for continuous, spot-on, non-destructive inspection of moisture levels in roofing and waterproofing systems. It also allows measuring humidity conditions in concrete slabs, wooden structures and ambient relative humidity and dew point conditions.
Complete roof and wall kit — continuous and spot non-destructive inspection
Brings together the DEC SCANNER (large areas) and the INSPECTOR PACK (punctual measurements of walls and roofs).
Continuous and spot inspection of humidity levels — roofs, waterproofing, concrete, wood, RH and dew point.
Complies with ASTM D7954 (roofs) and ASTM F2170 (concrete with Hygro-i2).
The Roofing Master Pack is the complete kit for roofing professionals. It allows continuous and spot non-destructive inspection of moisture levels in roofing and waterproofing systems up to 15 cm depth. It also measures humidity in concrete slabs, wooden structures, ambient relative humidity and dew point conditions.
Two complementary technologies: the DEC SCANNER quickly covers large flat roofs on wheels, while the INSPECTOR PACK refines the diagnosis on walls, localized areas and materials (concrete, EIFS, wood).
The pack includes the Tramex console equipped with an analog screen and a needle (vu-meter) allowing precise detection of the humidity level. It offers different sensitivity modes:
The handle — equipped with two extensions, it guides the base of the Tramex while ergonomically accommodating the console. The console clips onto the handle.
The base on wheels — non-invasive detector mounted on four wheels to quickly analyze large areas. Powered by two 9V batteries (included), infrared transmission to the console.
The case — robust storage to protect and transport each component of the DEC SCANNER.
The signal intensity varies depending on the humidity present in the material being tested. The detector converts the current power into a comparative value displayed on a clear analog dial.
Tests carried out during installation, during regular maintenance or before repair. The kit is portable and robust, with two modes: roofs and EIFS/foam, each with two levels of penetration. Calibrated to a reference dry area, it provides instant readings.
Instant, accurate, multi-mode impedance scanner for assessing moisture in roofs (ASTM D7954), EIFS, foam insulation and building envelopes. The multi-mode feature provides deep penetration and helps trace leaks to their source.
The CMEX5 quantitatively measures the humidity of concrete floors and slabs. Integrated hygrometer (RH, temperature, dew point). Bayonet port for Hygro-i2 probes — ASTM F2170 standard. Instant and precise quantitative measurement.
The IRT2 — non-contact dual laser infrared, 12:1 ratio, high/low alarms. Range -50 °C to 650 °C, accuracy 1 to 1.5%, response 0.15 s, 9V battery, EN60285 class II laser standard.
4/ Robust electrode, insulated pins 200 mm — CMEX5 and MEX5 compatible.
6/ Soundby Hygro-i2®—measures RH, temperature and dew point in narrow spaces. CMEX5, MEX5 and RHTX compatible.
To create pilot holes for long pin probes in EIFS and roofing systems.
Extension handle for the Tramex floor and wall leak detector.
Download the Tramex Meters app to retain data during diagnostics.
Login to leave a review
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.
No favorite products at the moment
Type at least 3 characters
No products found. Please try a different search.