Caméra Télescopique Scopicam

    Scopicam® - Telescopic inspection camera

    Reference: 210080
    HT €1,320.00
    TTC €1,584.00

    The telescopic inspection camera Scopicam®allows you to inspect areas located from 1.6 meters up to 6 meters in height. Thanks to its telescopic pole and its two extensions, the length is adjustable. The boom is topped with a 29 mm diameter camera head on a 33 cm long swan neck (80 cm optional). The viewing angle of the camera is 120°.

    Configurez votre produit

    Quantity
      Disponible

    Paiement sécurisé — CB, Visa, Mastercard, PayPal
     

    Paiement sécurisé

    Transactions protégées et données confidentielles.

     

    Livraison 24-48h

    Expédition express depuis nos ateliers à Toulouse.

     

    SAV atelier France

    Réparation sous 48h — concepteur français depuis 2004.

    Why use our telescopic inspection camera: Scopicam®?

    The telescopic inspection camera Scopicam® is a tool that can be used preventively or curatively, it is essential for carrying out video inspections at height in the sectors:

    • industry
    • customs
    • maritimes
    • crafts

    In the industrial sector, the Scopicam ® Camera is used to inspect and control the condition of tanks.

    Customs use this inspection camera to visualize the nature of the loading in the containers. In fact, they can explore the nooks and crannies, in order to spot possible illicit products, without having to unload the entire container. Like our entire range of pipe inspection cameras and industrial endoscopes, the Scopicam ® camera relieves you of restrictive and tedious methods.

    Some boat owners use the Scopicam ® to inspect the hull of their boats in return for rental or to identify possible shells that could damage the boat.

    For craftsmen, the Scopicam ® can have multiple uses. You can carry out a gutter inspection without having to climb onto scaffolding. If there is suspicion of infiltration at the ceiling level, you are able to carry out a camera pass with the Scopicam ® telescopic camera, in order to ensure the watertightness of your construction. You can also check the electrical network or ensure the condition of the ventilation circuits.

    Features of the Scopicam ® endoscopic camera

    Schema of the contents of the Scopicam® case
    • The 29mm diameter camera gives you a viewing angle of 120°. It is equipped with a 1/4 inch CMOS sensor and surrounded by 12 white LEDs.
    • The Scopicam ® telescopic camera has a 33 cm flexible hose and a 29 mm diameter camera. The camera is supplied with 2 handles equipped with accumulators. You benefit from 2 hours of battery life per round. In addition, the Scopicam® has two 85 cm extensions to adjust the length of your telescopic camera.
    • You can save your endoscopic inspections in photo and video format on the SD card.
    • The telescopic camera has a shape memory cable, so you can bend it 90°, in order to have a vision that is not just linear.

    Our extensions are made of carbon, a material known both for its great resistance and for the lightness it offers. The camera lens is made of spahir crystal, which makes it very durable.

    Water thread technology

    Allows you to keep the image plumb and thus distinguish the top and bottom of the pipe.
    It provides great comfort of use and facilitates analysis.

    Diamètre d'utilisationØ30 à infini
    Coudes à 90°non
    Diamètre de la têteØ23 mm
    Rotativenon
    CapteurCMOS
    Eclairage12 Leds
    Résolution du capteur800 x 480 px
    Résistance à la pression1 Bar
    Sondenon
    Fil d'eauOui
    Profondeur de champsde 8 cm à l'infini
    Taille d'écran5 Pouces (12.7 cm)
    Résolution écran800 x 480 px
    Commentairesaudio
    Longueur jonc / flexible / câbleperche : min. 1.6 m / max. 6 m
    Température de fonctionnement-20° à +50°C
    Garantie1 an pièces et main d'oeuvre
    Fonction enregistrementPhoto, Vidéo, Audio (carte SD)
    Poids11 kg
    Référence210080

    Documents