TRAMEX Roofing Master Pack - Roof terrace and wall humidity detection

The Roofing Master Pack is the complete kit for roofing professionals. It allows continuous and spot non-destructive inspection of moisture levels in roofing and waterproofing systems up to 15 cm depth. It also measures humidity in concrete slabs, wooden structures, ambient relative humidity and dew point conditions.

Pack contents — TRAMEX DEC SCANNER

The pack includes the Tramex console equipped with an analog screen and a needle (vu-meter) allowing precise detection of the humidity level. It offers different sensitivity modes:

• Scale 1: smooth surfaces where insulation is saturated and humidity mainly on the surface.
• Scale 2: smooth or gravelled surfaces where the insulation is partially saturated.
• Scale 3: the most sensitive — small quantities of water near the surface or significant concentrations at greater depth, including on gravelled areas.

The handle — equipped with two extensions, it guides the base of the Tramex while ergonomically accommodating the console. The console clips onto the handle.

The base on wheels — non-invasive detector mounted on four wheels to quickly analyze large areas. Powered by two 9V batteries (included), infrared transmission to the console.

The case — robust storage to protect and transport each component of the DEC SCANNER.

Pack contents — TRAMEX INSPECTOR PACK

The signal intensity varies depending on the humidity present in the material being tested. The detector converts the current power into a comparative value displayed on a clear analog dial.

Usage procedure

Tests carried out during installation, during regular maintenance or before repair. The kit is portable and robust, with two modes: roofs and EIFS/foam, each with two levels of penetration. Calibrated to a reference dry area, it provides instant readings.

1/ The humidity detector

Instant, accurate, multi-mode impedance scanner for assessing moisture in roofs (ASTM D7954), EIFS, foam insulation and building envelopes. The multi-mode feature provides deep penetration and helps trace leaks to their source.

2/ The humidity tester

The CMEX5 quantitatively measures the humidity of concrete floors and slabs. Integrated hygrometer (RH, temperature, dew point). Bayonet port for Hygro-i2 probes — ASTM F2170 standard. Instant and precise quantitative measurement.

4-6/ Probe and pin

4/ Robust electrode, insulated pins 200 mm — CMEX5 and MEX5 compatible.

6/ Soundby Hygro-i2®—measures RH, temperature and dew point in narrow spaces. CMEX5, MEX5 and RHTX compatible.

8/ Tramex Meters Application

Download the Tramex Meters app to retain data during diagnostics.

Compare Tramex kits

• Tramex DEC SCANNER — mobile scanner on wheels for large roofs
• Tramex INSPECTOR PACK — portable wall and roof kit
• AGM TEC smoke generator — visual complement under membranes