Tubicam® XL 360 HAD Compact - Rotating inspection camera with waterproof control
Reference: 120031
HT€8,990.00
TTC€10,788.00
TheTubicam®XL 360 is a rotating pipe inspection camera, the camera head of which can be directed from the console. It allows you to inspect pipes with a minimum diameter of 60 mm and a maximum diameter of 800 mm linearly. Incorporates a 512Hz probe for localization from the surface integrated into the camera.
Paiement sécurisé
Transactions protégées et données confidentielles.
Livraison 24-48h
Expédition express depuis nos ateliers à Toulouse.
SAV atelier France
Réparation sous 48h — concepteur français depuis 2004.
UsageØ60 to 800 mm
Head diameterØ50 mm rotatable 360°
90° elbowsMin. Ø120 mm
IP6810 bar (90 m)
Ring length60 m
Red diameterØ9 mm
LoggerPhoto / Video
CommentsAudio / Written
The Tubicam® XL 360 HAD Compact: usable in rainy conditions
The Tubicam® XL 360 HAD is a rotating pipe inspection camera, the camera head of which can be directed from the console. This version is equipped with a compact and waterproof screen for easy transport and use in all conditions. Thanks to its focal length and powerful lighting, it allows you to inspect a wide range of networks from Ø60 mm to Ø800 mm.
The Tubicam® XL 360 HAD is state-of-the-art equipment which offers you an image definition of 1280 × 720 px. The camera is equipped with a high sensitivity CMOS sensor, perfectly suited for pipeline inspections. The inspection camera integrates the following technologies: the metric counter, the tubitext (keyboard for incrementing comments) and the 512 Hz probe.
Rotating camera and centerers
The camera head measures 50 mm in diameter. Thanks to its size and the rigidity of the rod, you pass the elbows at 90° from 120 mm. The camera eye is framed by 4 adjustable white LEDs.
The Tubicam® XL 360 HAD inspection camera can be supplied with 3 centralizers which raise your camera head so that it does not collect the bottom of the pipe, and your vision is not obstructed by deposits. These three centralizers are of different sizes: 2 × arch centerers (165 mm / 220 mm) and 1 × rigid centerer (78 mm).
The 3 centralizers supplied: 2 hoops (165 / 220 mm) and 1 rigid centralizer (78 mm)
In order to facilitate the passage of the camera over long distances, you can add the stainless steel centering device with wheels (sold separately). This can be adjusted to adapt perfectly to the diameter of the network inspected.
A reinforced fiberglass rod
The rod is sheathed in reinforced fiberglass to offer you a good compromise between the rigidity necessary to be inserted and the flexibility to pass bends up to 60 meters (or 120 meters as an option when ordering).
What options are included in the rotating pipeline camera?
Metric counter: The metric counter or odometer tells you how far your camera head is from your position. If you don't have elbows, simply transfer the distance linearly to be able to locate your camera head.
512 Hz probe: the Tubicam® XL 360 HAD inspection camera integrates a probe emitting frequencies at 512 hertz. Coupled with a surface locator (Vscan® or vLoc 3 Cam), you will precisely detect your inspection camera, and thus know at what depth excavate.
Integrated keyboard: it allows you to write comments during your ITV inspections and thus get a head start on your final inspection report.
Always with a view to constant improvement, the connectivity of the Tubicam XL 360 HAD V2 changes to aircraft connectivity. This new connection is equipped with a double seal, a quick clipping and unclipping system, as well as a screwable ring for perfect sealing and unrivaled ease of use.
V2 aircraft connectors — quick clip and double seal
The video control room is originally presented in the form of a case.
Discover the HD range — which Tubicam® HD do you need?
Tubicam® HD range comparison — AGM TEC Bessières (31) expertise — * = optional
The AGM TEC Toulouse commitment
Expert Support: Technicians based in Bessières — 05 61 42 90 63
Reactive after-sales service: Integrated workshop — repair within 48 working hours
Permanent stock and demonstrations in Bessières — French designer since 2004
Equip the inspection cameraTubicam® XL50 / XL 360 HAD with the stainless steel centering starin order to be able to guide the push camera head into the pipes. The stainless steel centering star is also equipped with casters and adjustable in diameter to facilitate progression in conduits of 200 to 500 mm.
Developed in France by AGM TEC (Toulouse), Tubilog allows you to generate professional, clear and detailed video inspection reports in just 4 intuitive steps. Entirely dedicated to the Windows environment, this business software natively integrates the NF EN 13508-2 standard.
Place an order and a technician will contact you for installation and training (1 hour).
The Vscan pipe detector is dedicated to the detection of probes integrated into the heads of Tubicam® inspection cameras for searching rainwater and sanitation networks.
Pour quels diamètres de canalisations la Tubicam® XL 360 HAD est-elle adaptée ?
La Tubicam® XL 360 HAD inspecte les réseaux de Ø60 mm à Ø800 mm en linéaire. La tête rotative de Ø50 mm franchit les coudes à 90° à partir de Ø120 mm. C'est la caméra rotative la plus polyvalente de la gamme Tubicam® HD pour les grands diamètres.
Quelle est la différence entre la version Compact et la version mallette ?
La version Compact intègre un écran étanche directement sur la régie pour un transport et une utilisation facilités, y compris sous la pluie. La version mallette classique propose une régie sous forme de mallette transportable. Les deux versions partagent la même tête rotative Ø50 mm et les mêmes fonctions (odomètre, sonde 512 Hz, enregistrement photo/vidéo).
Quelle longueur de jonc choisir : 60 m ou 120 m ?
Le jonc en fibre de verre renforcée Ø9 mm est proposé en 60 m (configuration standard) ou 120 m (option à la commande). Le jonc de 60 m offre un bon compromis rigidité/souplesse pour franchir les coudes. Le jonc 120 m convient aux inspections de longue distance dans les grands réseaux.
Comment fonctionne la sonde 512 Hz intégrée ?
La caméra émet des fréquences en 512 Hz détectables en surface avec un localisateur comme le Vscan® ou le vLoc 3 Cam. Couplée au compteur métrique, vous localisez précisément la tête de caméra et estimez la profondeur d'excavation nécessaire.
À quoi servent les centreurs fournis ?
Les 3 centreurs (2 arceaux 165 / 220 mm + 1 rigide 78 mm) surélèvent la tête de caméra pour éviter les dépôts au fond de la canalisation. Pour les longues distances, le centreur inox à roulettes (vendu séparément) facilite la progression dans les conduits de 200 à 500 mm.
Qu'est-ce que la connectique avion V2 ?
La connectique avion V2 remplace l'ancienne connectique pour une meilleure étanchéité : double joint, clipsage/déclipsage rapide et bague vissable. Elle garantit une connexion fiable entre la régie et le touret, même en conditions humides (IP68 — 10 bars).
Quels sont le poids, la garantie et les délais ?
Le système complet pèse environ 39 kg (dimensions 77 × 89 × 37 cm, référence 120031). Garantie 1 an pièces et main-d'œuvre. Disponible sous 24 h. SAV à Bessières sous 48 h ouvrées. Contact : 05 61 42 90 63.
Où trouver la fiche technique PDF ?
Consultez l'onglet Fiche produit PDF sur cette page. L'onglet Fiche technique reprend les caractéristiques détaillées (résolution 1280 × 720 px, IP68 10 bars, autonomie 7 h, sonde 512 Hz). Des vidéos de présentation et de guide d'utilisation sont disponibles dans l'onglet Vidéos.
Tubicam® XL 360 HAD Compact - Rotating inspection camera with waterproof control
TheTubicam®XL 360 is a rotating pipe inspection camera, the camera head of which can be directed from the console. It allows you to inspect pipes with a minimum diameter of 60 mm and a maximum diameter of 800 mm linearly. Incorporates a 512Hz probe for localization from the surface integrated into the camera.
The Tubicam® XL 40 HD camera is intended for the horizontal inspection of ducts from Ø60 mm to Ø400 mm. It passes elbows at 90° from Ø100 mm. HD case with integrated WiFi to view the intervention on a smartphone or tablet.
TheTubicam®XL 360 is a rotating pipe inspection camera, the camera head of which can be directed from the console. It allows you to inspect pipes with a minimum diameter of 60 mm and a maximum diameter of 800 mm linearly. Incorporates a 512Hz probe for localization from the surface integrated into the camera.
Product Comments